Xtreme Wireless Microphone

Be the first to review this product

SHIFT THE KNOB OF BOTH THE TRANSMITTER AND RECEIVER TO 'ON' MODE
PRESS THE MONITOR (CENTER BUTTON) ON THE RECEIVER. THE GREEN LIGHT WILL INDICATE THAT IT IS ON
PUT THE HEADPHONES ON THE RECEIVER TO CHECK YOUR MIC AND VOLUME SETTINGS
THE VOLUME CAN BE CONTROLLED UP TO THREE LEVELS. IF PRESSED ONCE, LEVEL 1 GETS ENABLED AND SO ON
THE EXTERNAL MIC CAN BE PLUGGED-IN TO THE TRANSMITTER IF REQUIRED
FOR MOBILE PHONES:- USE A 3.5MM (TRRS TO TRRS) TO CONNECT TO A MOBILE PHONE OR A COMPUTER TO START RECORDING
FOR CAMERA:- USE A 3.5MM (TRS TO TRRS CABLE) TO CONNECT TO THE MICROPHONE INPUT JACK OF A CAMERA TO START RECORDING

Available Offers

TheHomeOffice Rewards: Register & Get Points Worth Rs 300 Now ! REGISTER

For Bulk Orders & For Corporate Discounts? ENQUIRE

₹3,000.00

Availability: In stock

SKU

OFD14_05299_00

Earn 250 points for writing a review for this product

Details

SCROLL DOWN TILL THE PRODUCT DESCRIPTION PAGE TO KNOW 'HOW TO USE THE PRODUCT'. Compact and Quick Pairing: Ultra-light weight of 52g with fast pairing feature that connects to the receiver within 5 seconds from your mobile or DSLR camera. Just plug in the receiver to your device and wait till the pairing indication flashes.
Transmission Rate for UHF mic and receiver: 500-690Mhz with 10dBm transmission power that ensures low level of latency and increases audio quality and clarity
Work Time: XAWL303 wireless mic has a work time of 4-5 hours. Power capacity 3.7V/400mAh. Charging time for the mic and receiver is 2 hours each. USB type-C computer cable provided in-box.
Monitor Port for Audio monitoring, Playback Port for real-time music output, Volume indicator for volume level, power indicator for power status indication and sturdy back clip provided for microphone and receiver for smartphone and camera pairing.
5)Wide Compatibility: Wireless UHF Microphone XAWL303 if fully compatible with Android Mobiles, iPhone, DSLR and Video Cameras. Please note: for type-C and Apple devices, relevant OTG converter will have to be purchased separately, not provided in-box. No Bluetooth required.
What’s in the box: transmitter and receiver, 3.5mm Mobile TRRS Cable, 3.5mm Camera TRS Cable, USB Type-C Computer Cable and Premium Hardcase.
Best suited for mobile phone and DSLR camera voice recording, singing, YouTube, vlogging, online tutoring and work from home. Enjoy crystal clear audio handsfree without any hassle of wires.
Get access to Free podcast learning course with this product, learn how to start your first podcast and set up your first home video. Just scan the sticker included on product package and enter your unique access key to start learning

More Information

More Information
Product Size	27 x 16.5 x 8.1 cm
Product Weight	410 Grams

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Additional Features

1. Supreme, UHF- All Purpose Wireless Microphone

UHF- Ultra High Frequency Wireless microphone is a high performance product that offers supreme broadcast audio quality. The sound is delivered crystal clear under any conditions and up to a distance of over 25- 30ft which offers lot of flexibility for all kinds of content.

XAMWL303 is a Clip-on mic or beltpack mic with transmitter and receiver. The device is already paired at the factory.

The Transmitter (TX):- The transmitter acts as either a quick and easy clip-on wireless mic, due to its high-quality built-in omnidirectional condenser capsule.

The Receiver (RX):- The RX is just as compact, which makes your rig that much easier to carry and facilitates mounting on smartphones or cameras that can easily snug in your mobile holder/ camera’s shoe mount.

2. Wireless mic Pairing tip- if the existing pairing gets disconnected

ATTENTION:- The devices are paired at the factory level (pls do not disturb the existing pairing, DO NOT TOUCH THE FREQUENCY BUTTON ON TRANMITTER/ RECEIVER), if it gets disconnected due to the interference reasons, follow the steps below to reconnect it again:-

Turn on the microphone and the receiver at the same time. Long press the frequency pairing button of the transmitter for 2sec till the power light starts flashing. Now long press the frequency pairing button of the receiver for 2sec, the signal light flashes for three times. Once the flashing stops, press the mic pairing button once. Now both the pairing lights will remain stable and will stay turned on, that shows that the pairing is done successfully.
Monitor indicator- when the green indicator is on, the monitor function is on, when the indicator is off, the monitor is mute. Monitoring can be done using the standard 3.5mm monitor interface using headphones or monitor speakers.
The volume indicator light flashes slowly for each volume adjustment. When level 1, indicator light flashes one time. When level 2, indicator light flashes two. When level 3, indicator light flashes three. Preferably, keep the mic volume at level 2 to avoid the shrillness in the audio.

3. Perfect wireless mic solution with wide compatibility

Caters to content creators in all the disciplines- be it travel vlogs, online classes, cooking videos, work from home or an interview- you know that your audio output is always intact.

SOME POINTERS

The charging is done using the USB to Type C charging cable. Both the transmitter and receiver can be charged at the same time.
For Camera/ Mixers/ Amplifiers:- Use a TRS TO TRRS Cable. For mobile phones/Computers:- Use a TRRS TO TRRS Cable.
Some Android versions are not suitable for their own camera app. In such cases, download the camera app separately.
The mic has at least 4 Hrs of heavy usage time, over 2hrs of charging time, an inbuilt condenser and an effective working range of over 25 feet.
External microphone jack has a provision of connecting the mic with TRS connection (Xtreme Acoustics- Lavalier condenser microphone). Plug-in the external lavalier mic (LM-01) on to the mic jack of the transmitter , and shift the knob to the Camera mode (after put in the cell given in the Lavalier mic box). Once the recording is done, shift the knob to the 'switch off' mode.
Note- This wireless mic has a transmitter and a receiver with 3.5 mm jack, meant for use with mobile devices and computers with 3.5mm connection. For Type-C or Iphones, get an original OTG adapter.

4. Unmatched performance. Incredibly small. UHF Wireless mic.

In-built microphone

It has an internal electret microphone. If no external microphone is plugged in, the transmitter will use an internal microphone.

RX- Monitor indicator, Headphone features

Monitor indicator- when the green indicator is on, the monitor function is on, when the indicator is off, the monitor is mute.
Monitoring can be done using the standard 3.5mm monitor interface using headphones or monitor speakers.

TX- Volume indicator, External mic features

The volume indicator light flashes slowly for each volume adjustment. When level 1, indicator light flashes one time. When level 2, indicator light flashes two. When level 3, indicator light flashes three.
External microphone provison with 3.5mm input.

Estimated Delivery Timeline

‌Estimated Delivery Timeline